Page no. 19 | Firmware
NOTE: The commands are not case sensitive.
7.2.3
KY-CL2F-H Host Unit configuration
In order to format the system, choose the required command sequence:
Command
Description
Available options
format
mode
1- Base mode
2- Medium mode
3- Full mode
4- Deca10(8Taps) mode
5- Deca8(10Taps) mode
type
1- AreaScan
2- LineScan
uartbaud
port
0-CameraLink
1-RS232_0
2-RS232_1
3-RS422
baud
0-9600
1-19200
2-38400
3-57600
4-115200
5-230400
6-460800
7-921600
Table 7 : Host unit configuration
Example:
To configure the host to uart baud rate 9600, Deca8 mode area scan, set the following commands:
a.
uartbaud 0 0
b.
format 5
7.3
Firmware update
1.
The extender supports firmware update via USB using a serial emulated terminal. To initiate firmware
update the following steps should be taken:
2.
Connect the USB cable to the extender and acquire connection using Silabs drivers (drivers need to be
downloaded manually if an automatic download isn’t initiated).
3.
Open serial emulated terminal (usage of Tera Term terminal is recommended) and set serial
communication protocol as described in Table 4.
4.
In the terminal window type “status” followed by carriage return and checks the current firmware
version.
5.
Choose the firmware update option by entering “firmware” followed by carriage return and wait for the
following message: "Now starting firmware update, please start file transfer using XMODEM:"
