Page no. 14 | Error! Not a valid bookmark self-
reference.
Figure 6 : SFP+ Module with TX output and RX input marked
Figure 7 : Connecting the cable to SFP+ Module
6.1.6
Removing the SFP+ Module
In order to remove the SFP+ module, follow these steps:
1.
Turn the camera and the computer off.
2.
Disconnect and remove all interface cables from the ports.
3.
Open the bale clasp on the SFP+ module with your index finger, or a small flat-blade screwdriver, in a
downward direction, as shown in Figure 8.
4.
Grasp the module between your thumb and index finger and carefully remove it from the port, as shown
in Figure 9.
5.
Insert the clean dust covers into the module, as shown in Figure 10.
Figure 8 : Opening the bale clasp of an SFP+ Module