Page no. 9 | System Description
5
System Description
5.1
External View of the KY-EXT-CL system
Each
KY-CL2F-D/H (device/host)
unit is housed in a compact, metal enclosure. Each unit has a power
connector, 2 Camera Link connectors (MDR), SFP+ cage, 2 x RJ45 connectors for GPIO and a Mini USB
Terminal interface, as shown in Figure 1.
SFP+
connector
Terminal
interface
CL
connector
Power
connector
CL
connector
GPIO
connectors
Figure 1 : KY-EXT-CL external view
Each of the Camera Link and SFP+ connectors is paired with a status LED and there is a system status LED
(see 5.3 section describing the LED status).
Each unit also has mount ears for an easy and secure installation on any flat surface.
5.2
Power supply
This device requires 12V power supply for proper function. The positive pin of the power supply connected
to the bottom pin of the connector, shown as “12V”, the negative pin connected to the upper right pin of the
connector, shown as “GND”. The power connector shown in Figure 1. The power connector used in each
KY-
CL2F-D/H (device/host)
unit is Tini-QG RA PC 3 pin (TRA3M SERIES). The mating connector of the power
connector is TA3FX.
Please, refer to Electrical specification section of this document for exact Power Supply requirements.
5.3
LEDs description
Each unit has several status LEDs, as seen in Figure 2.
