3-2
Using a #2 Phillips-head screwdriver remove screws
①
and
②
(seen in
figure 1) and lift up and away to remove the side panel.
Place the generator on a level surface.
DO NOT tilt the generator while adding oil.
It can cause you to overfill the oil and/or
cause the oil to leak into areas in which it
is not intended.
Remove the oil filler cap
①
(seen in figure
2)
Figure 2
Using the funnel
(provided) fill with 0.4L
of SAE 10W-30 or 10W-
40 (provided) (see figure
3). See figure 4 for
proper oil level
①
.
Figure 3
Replace oil filler cap and secure
side panel with screws.
Recommended engine oil:
A. YAMALUBE 4 (10W-40)
SAE10W-30 or 10W-40
B. SAE #30
C. SAE#20
D. SAE#10W
Recommended engine oil
grade: API Service SE type or
higher Engine oil quantity:
0.4L
Figure 4