– –
Screw
Screw
Screw
Screw
Screw
Screw
Rotate to this side
Figure 4
Figure 5
[Instructions] - Rotating the Sensor -
【A-6】
Loosen all six screws fully, as shown in Figure 4.
* Loosen each screws by around three rotations in turn, do not loosen the screws fully one by
one.
* The screws will not drop off easily even after fully loosened because they are provided with a
a drop prevention washer.
【A-7】
Lift the sensor unit end and rotate it slowly to this side, as shown in Figure 5.
* The sensor units are independent between the lower tone and medium/high tone areas. You
may need to rotate them separately.