Instructions for use SMARTmatic PROPHY S31 - 1.011.6760 SMARTmatic PROPHY S31 K - 1.011.6761 SMARTmatic
PROPHY S33 - 1.011.6800
2 Safety | 2.3 Accessories and combination with other equipment
▶
Do no use any damaged motors.
▶
Do not use motors for unauthorised purposes.
Note
The head housing is protected against the ingress of polishing paste by spe-
cial seals.
2.3 Accessories and combination with other equipment
Use of un-authorised accessories or un-authorised modifications of the device
could lead to injury.
▶
Only use accessories that have been approved for combination with the
product by the manufacturer.
▶
Only use accessories that are equipped with standardised interfaces.
▶
Do not make any modifications to the device unless these have been ap-
proved by the manufacturer of the product.
The lack of control equipment for changing the speed range and the direction of
rotation can lead to injury.
▶
Control facility for changing the speed and the direction of rotation must be
present.
▶
The medical device may only be combined with a treatment centre released
by KaVo.
▶
Comply with the Instructions for Use of the treatment centre.
2.4 Qualification of personnel
Application of the product by users without the appropriate medical training
could injure the patients, the users or third parties.
▶
Make sure that the user has read and understood the instructions for use.
▶
Only employ the device if the user has the appropriate medical training.
▶
Observe national and regional regulations.
The improper use of the device could lead to burns or injuries.
▶
Never touch soft tissue with the handpiece head or instrument cover.
▶
After treatment, place the medical device properly in the cradle without the
tool.
2.5 Service and repair
Repairs, servicing and safety checks may only be performed by trained service
personnel. The following persons are authorised to do this:
▪ Service technicians of KaVo branches after the appropriate product training
▪ Service technicians of KaVo authorised dealers after the appropriate product
training
Observe all the following items during servicing work:
▶
Have the service and testing tasks carried out according to the Medical
Product Operator Ordinance.
▶
Following expiry of the warranty, have the tool holding system checked
once a year.
7 / 26
