KaVo Primus 1058 C, Инструкции по уходу, Страница: 28 / 39

2.8.2 Intensive germ reduction (optional)
Note
Observe the instructions for use for the instruments.
Intensive germ reduction prevents the formation of microorganisms during exten‐
ted periods when the equipment is out of use. During intensive germ reduction,
the afferent water ducts are automatically filled with a higher concentration of
KaVo OXYGENAL 6. The intensive germ reduction program lasts ca. 45 minutes.
The increased hydrogen peroxide concentration acts in the system for at least 30
minutes.
An additional intensive germ reduction must be carried out during extended peri‐
ods on non-use (> 4 weeks).
The requirement for intensive germ reduction is displayed automatically at the first
start-up and after periods of non-use (weekends, public holidays, vacation etc.) by
flashing of the LED "Motor anticlockwise direction" every 2 seconds.
The OXYGENAL must be replenished if you hear a beep signal every 10 seconds
Note
The suction device cannot be used during the HYDROclean step (4.6).
Note
If the amalgam separator malfunctions during intensive germ reduction, the en‐
tire process is stopped.
Intensive germ reduction must be carried out:
▪ At first start-up
▪ Before, during and after prolonged downtimes (more than 4 weeks)
▪ Over the weekend
▪ During vacations
▪ After treatment of patients at high risk
Start intensive germ reduction
▶ Press the "Motor anticlockwise direction" button when the instruments are
mounted until you hear an beep and the LED flashes.
▶ Prepare for intensive germ reduction.
See also: Preparation for rinsing programme and intensive germ reduction, Page
23
▶ Press the "Motor anticlockwise direction" button once again. The intensive
germ reduction is started.
Intensive germ reduction runs in 8 steps:
Care instructions KaVo Primus® 1058 S/TM/C
2 Setup methods according to DIN EN ISO 17664 | 2.8 Automatic hygiene function of the water-conducting
system
26/35