KaVo Primus 1058 C, Инструкции по уходу, Страница: 27 / 39

T
M
▶ During the preparation for the rinsing program, press the foot control to set the
time for the dental instrument rinsing and the triple-function or multifunction
syringe between 0 seconds and 8:30 minutes.
The standard value for the rinsing program is 2:00 minutes per instrument.
Adjust the time with the "Chair up" and "Chair down" keys from 00:00 to 8:30 mi‐
nutes.
The rinse program has four steps.
Step Description
4.0 Fresh water supply
Duration: 60 seconds
3.0 Tumbler rinsing
Duration: 20 seconds
2.0 Rinsing of the handpieces
The rinsing time can be set variably for each instrument
The standard setting is 2 minutes per instrument
1.0 Rinsing the triple-function and multifunction handpiece
Duration: set rinsing time of the rinsing programme
0.1 Waiting position for setting down the handpieces
Start rinsing programme
Note
The rinsing program can be started immediately or the next morning.
▶ Press the "Preselected spray" button.
or
▶ Turn off the device and do not restart it until the next morning.
The cycle is started automatically.
Note
If the device is not used the entire day (i.e., the instruments are not mounted),
the rinsing program automatically starts the next morning when the device is
turned on.
Press the "Spray preselection" key to stop the rinsing procedure at any time.
If the device is turned off and then on again, the rinsing program also stops.
Care instructions KaVo Primus® 1058 S/TM/C
2 Setup methods according to DIN EN ISO 17664 | 2.8 Automatic hygiene function of the water-conducting
system
25/35