KaVo HealOzone 2130 C Скачать руководство пользователя страница 8

Страница: 8 / 61

Instructions for use HealOzone 2130 C
1 User notes

1.4 Transportation and storage

1.4.1 Packaging ordinance of August 28,1998

Note

Only applicable for the Federal Republic of Germany.

KaVo transport packaging must be disposed of and recycled by local disposal ser‐

vice providers and recycling companies in accordance with Dual System require‐

ments.

For more information about disposal and recycling, and an up-to-date list of local

disposal service providers and recycling companies, please visit the following In‐

ternet sites:

http://www.umweltdatenbank.de

http://www.quality.de

KaVo will bring KaVo transport packaging returned by the customer at the

customer's own cost to the appropriate recycling companies without reimburse‐

ment..

1.4.2 Transportation damage

Outside of Germany

Note

KaVo is not liable for damage arising from transportation.

Immediately inspect the delivery after receipt!

If external damage to the packaging is visible upon delivery, follow the procedure

below:

1. The recipient must record the loss or damage in the notice of delivery. The re‐

cipient and employee of the transportation firm must sign the notice of delivery.

The recipient can only assert damages against the transportation company ba‐

sed on these records.

2. Leave the product and packaging unchanged.

3. Do not use the product.

If the product is damaged and there is no discernable damage to the packaging

upon delivery, proceed as follows:

1. Report the damage immediately or at least 7 days after the delivery to the deli‐

very company .

2. Leave the product and packaging unchanged.

3. Do not use a damaged product.

Note

If the recipient does not follow one of the above instructions, the damage will be

held to have occurred after the delivery (according to . CMR law , section 5, Art.

30).

6/57

Содержание HealOzone 2130 C






























































Результаты поиска

Содержание HealOzone 2130 C

Отзывы:

Похожие инструкции для HealOzone 2130 C

Бренды по названию

Популярные бренды

KaVo HealOzone 2130 C, Инструкция по эксплуатации

Результаты поиска

Содержание HealOzone 2130 C

Отзывы:

Похожие инструкции для HealOzone 2130 C

Бренды по названию

Популярные бренды