KaVo HealOzone 2130 C, Инструкция по эксплуатации

Страница: 12 / 61

Instructions for use HealOzone 2130 C
2 Safety
|
2.2 Intended purpose
Table 2
Immunity tests IEC 60601 test level Conformance level Electromagnetic environ‐
ment - guidelines
Electrostatic discharge
(ESD) according to IEC
61000-4-2
± 6 kV contact discharge ±
8 kV air discharge
± 3 kV contact discharge ±
8 kV air discharge
Floors should be made of
wood or concrete or have
ceramic tiles. When the
floor is made of synthetic
material, the relative humi‐
dity must be at least 30%.
Fast transient electrical di‐
sturbances/ Bursts accor‐
ding to IEC 61000-4-4
± 2 kV for power lines ± 1
kV for input and output li‐
nes
± 2 kV for power lines The quality of the supply
voltage should correspond
to that of a typical business
or hospital environment.
Surges according to IEC
61000-4-5
± 1 kV normal mode volta‐
ge ± 2 kV common-mode
voltage
± 1 kV push-pull voltage ±
2 kV common-mode volta‐
ge
The quality of the supply
voltage should correspond
to that of a typical business
or hospital environment.
Voltage interruptions,
short-term interruptions
and fluctuations of the
supply voltage according
to IEC 61000-4-11
< 5% V (> 95% drop in the
VT for ½ period 40% V
(60% drop in the VT for 5
periods 70% V(30% drop
in the VT for 25 periods<
5% V(> 95% drop in the VT
for 5 s (250 periods)
The quality of the supply
voltage should correspond
to that of a typical business
or hospital environment.
When the user of the Hea‐
lOzone 2130 C needs con‐
tinued operation even
when the power supply is
interrupted, it is recom‐
mended to supply the
HealOzone 2130 C from
an uninterrupted power
supply or a battery.
Magnetic field with a sup‐
ply frequency (50/60 Hz)
according to IEC
61000-4-8
3 A/m Magnetic fields at the
mains frequency should
correspond to typical va‐
lues in a business and
hospital environment.
NOTE: V T is the alternating mains voltage before the test level is used.
10/57