KaVo Everest engine Base Camp 4140 Скачать руководство пользователя страница 10

Страница: 10 / 55

Assembly instructions Everest

engine Base Camp 4140

3 Safety

3.1 Description of safety instructions

3 Safety

3.1 Description of safety instructions

3.1.1 Warning symbol

Warning symbol

3.1.2 Structure

DANGER

The introduction describes the type and source of the hazard.

This section describes the potential consequences of non-observance.

▶ The optional step contains necessary measures for avoiding hazards.

3.1.3 Description of hazardous steps

Safety instructions with three hazard levels are used in this document for avoiding

personal and property damage.

CAUTION

indicates a hazardous situation that can lead to property damage or minor to mo‐

derate injury.

WARNING

indicates a hazardous situation that can lead to serious injury or death.

DANGER

indicates a maximum hazardous situation that can directly cause serious injury or

death.

8/51

Содержание Everest engine Base Camp 4140
























































Результаты поиска

Содержание Everest engine Base Camp 4140

Отзывы:

Похожие инструкции для Everest engine Base Camp 4140

Бренды по названию

Популярные бренды

KaVo Everest engine Base Camp 4140, Руководство по сборке

Результаты поиска

Содержание Everest engine Base Camp 4140

Отзывы:

Похожие инструкции для Everest engine Base Camp 4140

Бренды по названию

Популярные бренды