KaVo DSEclinical 5197, Инструкция по эксплуатации

Страница: 28 / 52

5.5.2 Setting the cooling level
▶ Press the preselected spray button.
or
▶ Press the preselected spray button on the multifunction foot control.
Both LEDs of the cooling status button shine: Spray cooling status
5.5.3 Setting the cold light
▶ Press the preselected cold light button.
The cold light LED shines: Cold light on
5.5.4 Setting cold light intensity
The cold light intensity can be set in 10 levels.
▶ Press the cold light button and keep pressed.
A buzzer sounds every second after the initial buzzer sounds. A buzzer is
equal to one level.
5.5.5 Storing values
▶ To store settings, hold the LP/AP button, with the instrument removed, until
you hear a signal.
5.6 Use INTRA LUX Motor K 200 and INTRA LUX Motor KL 701 /
KL 703
Note
Following instructions for use, service instructions and installation instructions in
the instrument packaging.
The following settings can be changed:
▪ Direction of motor rotation
▪ Motor speed
▪ cooling condition
▪ cold light intensity
The settings for the speed, spray and cold light are made in the same manner as
with the turbine.
Instructions for use DSEclinical Typ 5197 / DSEclinical Typ 5197eH
5 Operation | 5.6 Use INTRA LUX Motor K 200 and INTRA LUX Motor KL 701 / KL 703
26/48