KaVo DIAGNOcam 2170 U, Инструкция по эксплуатации

Страница: 24 / 38

Instructions for use DIAGNOcam 2170 U
5 Operation | 5.4 Software
24 / 38
1
① Light aperture (inner)
▶ Attach the occlusal tip to the handpiece.
▶
Contact the light apertures
①
to the gingiva.
▶
Place the spacer of the occlusal probe on the neighbouring tooth, and mon-
itor the live picture.
▶ Tip the probe slightly if needed.
▶ Use control buttons 2 and 3 to select the tooth in the tooth diagram for
which a picture will be saved.
▶
Press the ring switch to create a still picture and save it.
5.4 Software
Note
A PC is required for the operation of the camera (not included in the delivery)
Note
The DIAGNOcam may only be used on equipment which at least fulfils the
standard EN DIN ISO 60950.
Note
The distance between the PC and camera cable (floor terminal box) must not
exceed 10 m. High-quality, active USB extension (maximum 5 m long each)
must be used. (KaVo recommends one or two USB extensions 5m
Mat. no.
1.004.6953 )