manualshive.com logo in svg

KaVo ARCTICA Engine, Инструкции техника

Поделиться
Скачать
KaVo ARCTICA Engine Скачать руководство пользователя страница 57

▶ With its chuck side facing upwards, guide the coolant manifold over the lug of

the bellows and clamp it down using the screw ① and the universal tool

(Mat. no. 1.009.0859).

9.5

   

Mount housing

▶ To mount the housing, proceed in reverse order.

See also:

2.6 Dismounting and mounting the spindle cover, Page 15

2.5 Dismounting and mounting the guard door, Page 10

2.3 Dismount and mount the housing, Page 6

2.1 Dismount and mount the right side panel, Page 5

2.2 Dismount and mount the left side panel, Page 6

▶ Connect the machine to the power supply and to the network.

▶ Switch on the machine and perform a reference run.

9.6

   

Driving to chuck changing position

▶ Close the door of the machine.

 

 

 

 

 

 

 

 

 

Technician's instructions KaVo ARCTICA Engine
9 Mounting the spindle | 9.5 Mount housing

55/106

Содержание ARCTICA Engine















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды