30
ABSORmatic
®
plus.
Full system serviceability only when
using original “KaVo filter car-
tridges“.
It should be ensured that suitable pro-
tective equipment (e.g. mouth protec-
tion, gloves, etc.) is worn.
When after a long period of use the filter
becomes worn to some extent, and this can
no longer be remedied by frequent “filter
cleaning“, the filter
including the brush
strip
must be changed.
Take off the front panel
and remove the
waste container (as described in 10.3)
Release the clamping nut
on the filter
flange
. Lift the filter flange
slightly
and remove.
Raise defective or damaged filter
at the
front and withdraw it. Un-screw the used
brush strip
. Fit new brush strip
with
three knurled nuts.
Pack used filters
and brush strip
in
PE waste bag (
Mat.- No. 0.228.3076
) and
place in waste disposal.
Carefully insert new filter
and align it
centrally in the rear filter flange.
Raise filter
slightly and refix the filter
with the front filter flange
by screw-
ing in the clamping nut
.
Carry out the further assembly as described
in 10.3.
Switch off power switch
and wait
approx. 20 sec., start again and the unit
returns to normal operating mode.
ABSORmatic®
ABSORm
atic
®
ABSORmatic®
#
”
