26
ABSORmatic
®
plus.
9.20 Installing the waste bag
for dust-
free removal of the contents of the filter.
Remove the front panel
and with draw
the stainless steel slide
under the base of
the waste container. Press down the locking
lever
of the waste container.
Insert the stainless steel slide
above the
waste container
in the “upper parking
position“ in the groove provided (must
come flush against the seal). Remove waste
container
.
Place waste bag
in the waste container
and press it against the base and sides of
the container. Lay the protruding material
in the double edge of the container. Press
the waste bag
against the contours of the
waste container to keep trapped air to a
minimum. Place cardboard insert (accesso-
ry disposal set
Mat.-No. 0.657.0951
) at
bottom of container and clamp.
Reinsert waste container
with waste bag
into the dust collector, withdraw the stain-
less steel slide
while pressing it upwards
against the rubber seal and refix the waste
container by pressing the locking lever
upwards. Insert the stainless steel slide
,
after having cleaned it under running water,
into the “lower parking position“ (under
waste container).
Refit the front panel #.
ABSORm
atic
®
ABSORm
atic
®
ABSORm
atic
®
ABSORm
atic
®
ABSORm
atic
®
ABSORm
atic®
#
Í
Í
Í
