Operating Manual
8
Original Operating Manual
The rotator with hanger assembly consists of a rotary joint (1), which is bolted to a base plate (2).
There is a drive (3) on the base plate (2) consisting of a bevel gear, gear box and hydraulic motor (4)
attached. This combination is attached to the fork carriage of the lift truck with upper (5) and lower
brackets (6).
The optional side shift (7) is equipped with support rollers (8) and is bolted onto the base plate (2).
3.3
Proper use of the equipment
Rotating fork positioner are intended for rotating loads such as crates, containers etc. that have been
picked up with fork arms.
Proper use of the machine and/or equipment includes the following:
Observance of the operating manual at all times.
Observance of the technical data on the identification plate on the attachment.
Adherence to the specified inspection and maintenance instructions.
3.4
Improper use
Exceeding the allowable load capacity and load centre.
Dragging or pushing loads with the attachment
It is not permitted to transport loads which cause lateral forces on the forks.
It is not permitted to clamp loads.
Transporting persons with the load or load handling devices
Mounting auxiliary equipment on the attachment such that the original mode of usage
is changed, (e.g. fork extensions) must be authorised by the manufacturer.
