Operating Manual
Original Operating Manual
25
Fault
Possible cause
Correction
Solenoid valve
Not functioning
Solenoid coil defective
Replace solenoid coil
No power to the magnet
Inspect power cable and
connections
Legend: LT = lift truck, DBV = Pressure relief valve, WE-Drossel = elbow-type screwed
throttle, RJ = rotary joint
8.
Disposal
Prevent environmental damage by disposing of the following items properly in
accordance with relevant national regulations:
Hydraulic fluids, greases, lubricants and soiled working materials (Cleaning
rags, etc.)
Packaging material (Pallets, straps, cartons and plastic sheeting)
After decommissioning, the attachment should be disposed of in accordance with
local legislation and regulations.
9.
Transport
During transport of the attachment, care should be given to using appropriate means of support (e.g.
pallets). These must not be damaged. The attachment must be secured against slipping or tipping
over on the support.
10.
Decommissioning and storage
If the attachment is to be stored for an extended period, all hydraulic connectors must be sealed
against contamination and damage. Store the attachment in a clean, dry environment.
Clearance
Clearance too large
Bevel gear defective
Replace bevel gear
RJ defective
Replace RJ
Flange tip forwards
Bolts loose
Tighten bolts or replace if
necessary
Oil leakage
On motor
Hydraulic motor leaks
Change hydraulic motor
Bolt loose
Tighten bolt
Shaft seal defective
Renew shaft seal
On gear box
Filling level too high
Check and correct filling level
Seal defective
Change seal
