Operating Manual
14
Original Operating Manual
Centre the load to the middle of the lift truck during take-up and transport.
5.3
Driving
Ensure that pallets, boxes, containers and packaging are in good condition.
Do not drive with the mast tilted forward
Take care when driving that neither the attachment nor the load comes into contact
with the ground.
Ensure that multiple items stacked on top of one another are securely fastened.
5.4
Rotate
Rotation can cause damage to the load and the attachment. Ensure sufficient
distance of the load to the floor, the ceiling, to shelves, etc.
If higher torque than specified is generated by the load, the rotation device
rotates uncontrolled or not at all. This can lead to damage to the load and the
attachment. Note the torque given on the type plate of the attachment.
The torque given on the type plate refers to the pressure difference of 125 bar at the
hydraulic motor.
Only rotate loads parallel to the floor (set lifting frame vertically).
Do not rotate loads if there are people in the working area.
Rotate raised loads slowly. Fast rotating can influence the stability of the lift truck.
Ensure that carrying equipment, e.g pallets, crates, containers are not tipped off
during rotating.
