Kato Imer CARRY 105 ELECTRIC POWER, Руководство по эксплуатации

Страница: 41 / 48

4 MAINTENANCE
MINIDUMPER
CARRY 105EP
32
HIGH HUMIDITY OR SALTWATER.
In some locations, such as coastal areas, the machine may be exposed to the deteriorating effects of salt,
moisture, or both. To protect exposed metallic surfaces, wiring, paint and other items, keep them dry and
well lubricated where salt or high humidity are encountered.
1. Dry and paint exposed surfaces after rust and corrosion have been removed.
2. Where paint may not be applied, such as on polished or machined surfaces. coat the area with grease or
lubricant to repel water.
3. Keep bearings and their surrounding surfaces well lubricated to prevent the entry of water.
4. Hose down the machine periodically when working in saltwater. If necessary, use an oil soaked cloth to
clean moving parts.
5. Do not operate with track shoes immersed in water or mud. If the machine exceeds this limit,
disassemble, clean and lubricate the lower.
4.8 LONG STORAGE
To store the machine from long term, follow the next procedures:
•
Clean parts of the machine and store indoors. If you have to place the machine outdoors, choose a flat
place and cover the machine.
•
Apply grease on the exposed part of the hydraulic cylinder rods.
During storage, operate the machine once a month to maintain films of oil at the lubrication section.
Recharge the batteries at least once a month to protect them from damage, leaving the machine connected
to the electrical power supply until it is fully equalised. The word FINISH will appear on the screen.
Ensure the machine is well ventilated during recharge and avoid covering it.
After storage:
•
Wipe away grease on the hydraulic cylinder rods.
•
inspect the filling level of the oil tank.
C
ONDUCT WORK TO STORE THE MOTOR BY FOLLOWING THE INSTRUCTIONS REPORTED IN THE DESIGNATED
MANUALS
.
I
F YOU HAVE TO OPERATE THE MACHINE INDOORS TO PREVENT RUST AND GAS POISONING
,
KEEP GOOD
VENTILATION BY OPENING THE WINDOW OR THE ENTRANCE
.
WARNING