21 of 28
Establishing Internet Connection (optional)
If you would like to use HbbTV, it is necessary to connect the receiver to the internet using
an Ethernet cable.
►
Connect an Ethernet cable to the Ethernet port of the receiver (
⑥
in Fig.
3, p. 11).
➯
The connection to the internet is being established. An IP address is assigned
automatically.
Tip
The default setting of the receiver during the network login is
DHCP
, and the
internet connection is established automatically as soon as the receiver is
connected to the Ethernet cable.
If there is no internet connection after you have connected the receiver to the
Ethernet cable, make sure that the setting in the sub menu
DHCP
is set to
DHCP
. To do so:
1. Go to
Menu
▶
System Setting
▶
Network
▶
DHCP
.
2. Make sure that
DHCP
①
is set to DHCP
:
1
In case DHCP is set to another setting:
1. At
DHCP
, press
.
➯
A drop-down menu opens.
2. Press
to select
DHCP
.
3. Press
to confirm the selection
➯
The connection to the internet is being established. An IP address is
assigned automatically.
Activating Power Supply for an Active Antenna
1. Go to
Menu
▶
System Setting
▶
AV Setting
.
2. Press
and
to mark
5 V Output
.
3. Press
and
to select
On
.
4. Press
and
to confirm and leave the menu