17 of 28
7
Initial Set-up
NOTICE
Risk of material damage due to improper cable connection!
►
Only connect the unit to the mains and perform the initial set-up after the
installation work has been properly carried out as described in the previ-
ous chapters.
Tip
Nothing you do during the initial set-up can damage your reception system.
Contact your specialist dealer directly if you have questions or encounter
problems.
7.1
Remote Control
For the initial set-up you need to use the following buttons on the remote control:
(red)
channel scan in the complete frequency range
(gr
een)
channel scan in the selected frequency range
●
aborts input
●
takes one step back
●
closes menu
(on
)
select an entry from the menu or from a list
(on
)
select an entry from the menu or from a list
(on
)
●
adds an entry to a list/removes an entry from a list
●
confirms the settin
