15 of 28
If you are using (or have to use) an active antenna – that is, an antenna with a
pre-amplifie , you can power it from the receiver's antenna input.
►
Make sure to use an antenna designed for a 5 Volt supply, e.g. the Kathrein
BZD 30.
The default setting in the receiver sub-menu
5 V Output
is
OFF
, to prevent any
damage from occurring.
To Provide Power Supply to an Active Antenna:
1. Go to
Menu
▶
System Setting
▶
AV Setting
▶
5 V Output
.
2. In the
5 V
Output
sub menu, press
.
➯
A drop-down menu opens.
3. Press
to select the setting
ON
.
4. Press
to confirm the selection
➯
The active antenna is supplied with voltage via the receiver antenna
input.
6.2
Selecting the Installation Location
NOTICE
Risk of material damage due to improper installation site!
Follow the following instructions to avoid material damage:
►
Maintain at least the following clearance ar
ound the unit: 10 cm above,
5 cm behind, 2 cm to each side.
►
Never install the unit in a cupboard or on shelves with inadequate
ventilation.
►
Do not install the unit close to the sources of heat.
►
Do not expose the unit to direct sunlight.
►
Install the unit close to an easily accessible mains socket to be able to
disconnect the unit from the mains at any time.
►
Do not place any heavy objects on the receiver, e.g. a TV set.
