Inserting Batteries into the Remote Control
14 of 32
5
Inserting Batteries into the Remote Control
1. Remove the cover from the remote control. To do this, press gently on the point
②
,
slide the cover
①
to the rear
③
and lift it off (Fig. 4).
2. Insert the batteries supplied
④
into the battery compartment
⑤
. Ensure correct polar-
ity of the batteries (the polarity is marked inside the battery compartment).
3. Fit the cover again and slide it forward to the stop.
4
3
2
1
4
5
Fig. 4: Inserting batteries into the remote control (showing the principle)
6
Connecting the Receiver
6.1
Requirements
This Quick Start Guide describes how to connect and commission
single systems
of type
DiSEqC™1.0
or
simple LNB
for the satellites Astra 19.2°, East and Hotbird 13° East
1)
.
For further information, see the comprehensive instructions for use at
Contact your specialist dealer directly if you have questions or encounter problems.
1)
Astra 19.2° East is preinstalled at position 1 and Hotbird 13° East is preinstalled at posi-
tion 2.
