3 Selecting the TV standard
936.2825/-/1005/.4
e
Outp.
C 69
855.25 MHz
Stereo
RF on
Main menu
***
UFM 341
***
Freq.
855.25 MHz
level
-10
Standard I
Output sub-menu
You can set the TV standard in the output channel‘s sub-menu.
Select the TV standard from the controller sub-menu using the “+“ or “-“ button. The TV standards available to choose from are
B/G, D/K and I. The M standard can also be set, though only in the channel raster as per the B or G standard with 4.5 MHz
Vid./Aud. carrier-level spacing.
Note: Standards D, K, I and M on output side only in mono mode!
4 Selecting the audio mode
Switch modes using the “+“ and “-“ buttons on the controller (options: “Mono“, “Stereo“,
“2-tone“ or “Auto“).
Notes on “Auto“ mode:
■ Use only for video signal with VPS signal (data line)
■ The display depends on the content of the data line “Auto S” (Stereo), “Auto Z” (2-tone) and “Auto M” (Mono)
■ If there is no VPS signal the switch is automatically made to “2-tone” mode (displayed as “Auto *Z”)
The VPS signal is transmitted with all programmes broadcast in German featuring Videotext/Teletext.
Setting “Auto“ mode is generally advisable for all such programmes. Depending on the set mode,
the switch in the module is made automatically.
5 Disabling the channel unit
Outp.
C 69
855.25 MHz
Stereo
RF on
Main menu
Outp.
* C 69
855.25 MHz
Stereo
RF off
Display „RF off“
Disabling the channel unit means it is for all practical purposes shut down and no further output signal is generated.
You can use the “+“ and “-“ buttons to select “RF on“ or “RF off“.
Outp.
C 69
855.25 MHz
Stereo
RF on
Main menu
