![background image](http://html1.mh-extra.com/html/radio-shack/uhf-cable-rf-modulator/uhf-cable-rf-modulator_owners-manual_778926001.webp)
OWNER’S MANUAL — Please read before using this equipment.
©
2000 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
UHF/Cable RF Modulator
The UHF/Cable RF Modulator is an agile
mono modulator with digital type channel se-
lection, multi-channel frequency, and RF out-
put. It accepts left and right audio and video
signals from satellite receivers, VCRs, disc
players, and CCTV cameras. It has full chan-
nel memory for power outages and allows
switch-free distribution of audio and video in
UHF and cable TV channels.
Its other features include:
Digital Display — shows modes and chan-
nels selected.
Digital Type Channel Selection — lets you
select clear channels to transmit.
HRC and IRC — cable modes.
Digital PLL Tuning — limits channel drift.
Full Channel Memory for Power Outages
— retains the last channel after the power is
lost.
Wide Selection of Channels — lets you
choose from UHF channels 14 to 69, and
CATV/HRC/IRC channels 65 to 94 and 100
to 125.
THE FCC WANTS YOU
TO KNOW
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the
FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful inter-
ference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encour-
aged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult your local RadioShack store or
an experienced radio/TV technician for
help.
• If you cannot eliminate the interference,
the FCC requires that you stop using
your modulator.
Changes or modifications not expressly ap-
proved by RadioShack may cause interfer-
ence and void the user’s authority to operate
the equipment.
FCC DECLARATION OF
CONFORMITY
This device complies with Part 15 of the
FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
15-1243.A5.fm Page 1 Tuesday, September 12, 2000 12:59 PM