936.3627/-/1
109/3.7
e
7 Settings at system level
7.2
Settings for compiling the cable NIT
A UFX 312 or UFX 314 (BN 20610071) data bus de-multiplexer is required for compiling the cable NIT.
The “Cable NIT” entry in the system menu can be selected only if the central controller is connected to a demultiplexer
(control port).
Pressing the “ ” button brings you to the system menu, where the cable NIT settings can be made. Press the “ ” and “ ”
“Cable NIT” buttons in the system menu.
Pressing the “Sub-menu” button activates the sub-menu; pressing the “Sub-menu” button again deactivates it.
****
System
****
Cable NIT
Selection with +/-
System menu
“Cable NIT” sub-menu
****
Cable NIT
****
NIT:
Off
Compile
Network:
Name ID
Press the “ ” and “ ” buttons to select the desired parameter “Off/On”, “Compile”, “Name” or “ID”.
Press the “Sub-menu” button to activate the selected parameter and open the respective sub-menu.
****
System
****
Set language
Selection with +/-
System menu
“Set language” sub-menu
****
Language settings
****
English
The central controller is selected by pressing the double arrow buttons “ ” and “ ”. The procedure is exactly the same as for
the channel units; when selected the controller has the same priority as a channel unit.
7.1
Setting the language
Pressing the “ ” button brings you to the
system menu
, where the language can be set and the version numbers interrogated,
the system password set and the cable NIT settings made.
The instructions for this can be found at the start of the setup instructions, since these menus are accessible at the
channel unit level and relevant to it.
