manualshive.com logo in svg

Kathrein UFC 965si, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFC 965si Скачать руководство пользователя страница 43

43

Recording list view

The Recording list view can be called up 

at any time in EPG by pressing the

 

button.

The Recording list view shows you all the 
recordings (timers) that are scheduled.

A detailed description of the "Recording 
list" view can be found at the end of the 
item "Recording (Timer) list" in this section.

Electronic Programme Guide (EPG)

  Timer recording

The 

 button allows you to set a 

programme for recording at any time. 
The programme to be recorded can 
be selected from any EPG view. Press 

the 

 (green) button to open the Timer 

list menu.

You can set an automatic lead-in time and run-on time for your recordings on the menu 
"Multimedia", "PVR Setting".

To record using the UFC 965 you must connect an external hard disk 

*)

 to the USB 

port on the rear of the receiver and, prior to using it for the fi rst time, format it as 
described in the section "Main menu - Multimedia", "Storage".

Tip!

Содержание UFC 965si

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды