manualshive.com logo in svg

Kathrein MSK 130, Инструкция по эксплуатации, Страница: 60 / 100

Поделиться
Скачать
Kathrein MSK 130 Скачать руководство пользователя страница 60

 

MPEG Services

60 of 100

17 

MPEG Services

17.1 

Decoding the Signal Content

 

►

Touch 

SERVICE

 (MPEG services list) in the main menu.

 

➯

The MPEG decoder is activated. The meter saves the last measurement carried out 
by the user. This means that the MPEG decoder tunes on the last measured chan-
nel (SAT, TER or CATV).

 

➯

The MPEG services list function allows the user to decode the signal transport 
stream and to visualise the list of included services:

1

2

3

4

5
6

7

①

Channel tuning 
parameters

The essential tuning parameters, such as frequency, channel 
bandwidth and modulation standard are displayed.

②

Services list

Once the signal is locked and demodulated, the decoder 
starts scanning the transport stream to find service informa-
tion tables, containing all the information related to the trans-
port stream structure: number of services, list of PIDs, service 
names, etc. When all this information is available, the meter 
visualises the list of all the available services and displays 
the service type for each of them (

TV

, 

RADIO

 or 

DATA

), the 

encryption status (

ENC

, 

N

 = not encrypted or 

Y 

= encrypted)  

also the LCN for TV services.

③

DATE
VIDEO RATE

(Date and video bit 
rate)

The current date (day/month/year) and the video bit rate of 
the decoded service are displayed.

Содержание MSK 130





































































































Отзывы:

Нет отзывов