Kathrein MSK 130, Инструкция по эксплуатации

Страница: 45 / 100

45 of 100
For DVB-S2 multi-stream signals, it is possible for the user to select which ISI should be
demodulated from the signal. The meter demodulates the ISI #1 by default. The selection
is done via the
MENU & ? contextual menu:
Once selected the ISI of interest, the meter will automatically demodulate it, providing the
constellation and other ISI-dependent modulation information as well as the service list.
In the contextual menu it is also possible to set/change the value of the local oscillator (in
MHz) and to access the
CHANNEL LOGGER and ( VISUALIZE NIT ) functions.
The CHANNEL LOGGER allows the user to visualise and record RF measurements for
the tuned channel. Depending on the selected time span (from 30 minutes to 7 days), the
refresh speed of the diagram may vary. It is also possible to save the logger data to an
external USB drive connected to the USB-A port on the top panel. Once the USB device
has been plugged, it is possible to define a file name and start logging the measurements
via the contextual menu.