Kathrein ARU 3 Series, Руководство пользователя

Страница: 50 / 122

50 of 122
Operating ReaderStart Software
1
2
3
4
Fig. 21: Establishing connection to the reader
Establishing the Connection via an IP Address
1. Click the IP address field (
཰
in Fig. 21 ).
2. Enter the IP address.
Establishing the Connection Using a Host Name
1. Click the Name field (
ཱ
in Fig. 21 ).
2. Enter the host name of the reader.
If you do not know the name of the reader, click Search for Readers .
ᇜ
The readers found in the network are shown with their names, see
ུ
in
Fig. 22.
Tip
Ź
To allow only secure SSH connection with an encrypted transmission to the reader, check the box next
to the lock symbol (
ཱི
in Fig. 21 ); see also Establishing a Secure Connection, p. 68 .
5
6
Fig. 22: Establishing connection to the reader: search for
readers
The following steps describe establishing
the connection for readers with an IP
address.
3. In the
Ethernet
block, click
Search for Readers
(
ི
in
Fig. 21 ).
ᇜ
The screen on the left appears.
4. Select a reader under Readers with IP Address (
ུ
in the
figure on the left).
5. If there have been 2 or more DHCP requests sent by
the reader, the Readers without IP Address (DHCP) field
(
ཱུ
) is expanded. Then it is possible to assign the IP
address to the reader.