Katadyn EK-24, Инструкция по эксплуатации

Страница: 14 / 43

Katadyn Page 13
10.2 Overview Screen
Alarm indication:
Appears when an alarm occurs
Change to the «Alarm» Screen
Hour counter
ON/OFF Switch
Flow indication:
Only available with the option «Flow measurement»
EK is running
Voltage measurement
Current indication
Adjust Setpoint in 10
mA steps
Setpoint adjustment:
Increase or decrease the
Setpoint numerical
(mA or ppm)
Change to the «Settings» Screen
Setpoint indication
Local/Remote
Control indication
Local/Remote
Switches on the Screen “Overview”
Switch ON the EK System locally
The controller will ramp up the actual value to the Setpoint.
Switch OFF Locally the EK System.
Increases the Setpoint in 10mA steps up
Decreases the Setpoint in 10mA steps down
Numerical current (mA) Setpoint input.
If the option “Flow measurement” is activated and the control is set to
ppm, then the required dose* in ppm can be set over the numerical
input.
Change from “Overview” screen to “Setting” screen
*Dose control is calculated by the law of Faraday: 1mA= 4mg Ag+/hr