KAT VR WALK Premium Package, Руководство пользователя

Страница: 24 / 28

24 Starting Installation
17.Insert the grounding cable on the back of the support pillar one M4 bolt and one M4 inner hexagon spanner.Fix the
cable onto the pillar as shown in the picture and make sure the bolt is tightened.
18.Loosen the base plate holder and adjust the bottom of the holder to make it higher than the wheels; move KAT WALK
to an appropriate location; re-fix the base plate holder to prevent KAT WALK from sliding, and the installation is
finished.
Back of the support pillar
Screw ‒ M4
Terminal
Attention
1.The proper and stable installation of the support pillar structure serves as guarantee for users’good experience.
Therefore, please make sure the pillar structure is properly installed and that the installation is steady.
2.Avoid placing any objects on the base plate during the installation. Do not randomly step on the plate in
case of any damage to it, which spoils user’s good experience.
3.After the installation, check if all the bolts and nuts are fastened.
4.Please switch off all the power supply when installing circuits. Make sure all the circuits are power off to
avoid any potential danger.
5.As the three-in-one cable of the head-mounted display has limited length, please pay attention to the
length of the remaining circuit when doing circuit connection on the girder.
6.Please differentiate the connection conditions of different connections since there are comparatively
quite a lot of them.
7.If the bolt holes are not completely concentric when installing bolts, you may slightly rotate the parts to
make them concentric.