KAT VR WALK Premium Package, Руководство пользователя

Страница: 19 / 28

1９ Starting Installation
６.Insert the girder into the support pillar, make the flanges fit with each other,tighten the screws and shims at the
connection of flanges.
7.One person holds the support pillar while other two rotate the girder, making it rotate from a lying position to a
90-degree angle. Then place the bolts at the connection between the girder and the support pillar in the washer, and
tighten them to finish the fixing.
8.Insert the telescopic stick into the round hole at the front of the equipment, and slot the spring ?pallet and the spring
into the stick; then screw the safety nut onto thestick and the M5 set screws (two) to the side of ?the stick; screw the
round nut into the stick, and use the hook spanner to tighten it; finally slot the nylon nut into the upper end of the stick
and tighten it .
伸缩杆端部的法兰盘
必须处于此方向
telescopic stick
Always keep the flange on
the end of the stick facing
this direction
The direction of the flange on
the end of the telescopic stick
The thick side
of the flange
The thin side of
the flange