19 / 73
On
some
brake
chambers
used in vehicles, the emer-
gency release screw is lo-ca-
ted in its socket (1) behind the
brake chamber, not in its soc-
ket (4) next to it. In order to di-
sable the springs, it is allowed
to come out by simply turning
it with the appropriate key.
This operation should only be
used
until
the
trailer
is
serviced.
Before this operation, the ve-
hicle must fixed securely with
wheel chocks. Serious inju-
ries may occur.
3.1.6.2. Activation of Brake Chambers
Activation of brake chambers
•
Remove the nut (1) from release rod
(2) with a spanner.
•
Remove the release rod (2).
•
Screw the release rod into its place
on the brake chambers (3)
•
Close the plastic cover on the brake
chamber.
Brake chamber will be activated after
this operation.
Before this operation, the ve-
hicle must fixed securely with
wheel chocks. Serious inju-
ries may occur.
Don't drive without being sure
that all the brake system is
working properly after this
operation
3.2. Suspension System
Your vehicle is equipped with air suspen-
sion system.
3.2.1. Manuel Control
You may choose the fifth Wheel height
with a control button which is located at
the driver side.
When you set the button in position 1,
you may use your semi-trailer in a lower
fifth wheel height and when you set the
button in position 2, you may use your
semi-trailer in a higher fifth wheel height.
Lower driving height
