Heater cabinet and fuel tank
After the switch is turned to
the '0' position, the heater
continues to operate for a whi-
le. Do not disconnect the elec-
trical
connection
of
the
vehicle during this period.
Operation
of
the
liquid
heating
system:
•
Liquid heating system works with 24
volt energy. It is energized by the
socket (1) on the front of the tank.
Electrical connection
When making the electrical
connection, the (+) pole and
the
(-)
pole
must
not
be
confused.
•
Never confuse with (+) and (–) po-
les during the first connection to the
tractor.
•
The heater automatically stops at
78°C with the thermostat on it during
operation, and restarts automati-
cally at 72°C.
•
Open the ball valve (2) at the inlet of
the heating duct located at the back
of the tank.
Ball valve
•
The heater system has been tested
in our factory and its liquid and anti-
freeze have been completed. The
air of the system is taken away.
•
The system is operated by turning
the switch (3) in the cabinet to the
'FLAME'
position.
Switch in cabinet
•
To turn off the system, set the switch
to '0'.
After the switch is turned to
the '0' position, the heater
continues to operate for a whi-
le. Do not disconnect the elec-
trical
connection
of
the
vehicle during this period.
4.2.17. Warning Signs On the Tank
There are warning labels and plates (1)
at various places on the tank, especially
at the back of the tank. The purpose of
these is to inform other drivers and
