Remote control
Activation of the remote control:
•
Press two buttons that says ‘Ober-
luft’ (7,8) for minimum 2 seconds
simultaneously.
•
Thus, the remote control connects
with the receiver inside the panel.
No valve opens on the vehicle in this
case.
•
LED light (1) on the upper center
flashes in green in the active
condition.
•
Other LED lights (2,3,4,5) lights up
continuously in red.
Opening and closing of the bottom
valve:
When the button that says ‘Boden-ventil’
(1) is pressed, the pneumatic bottom
valve, which is the first closing element
of the discharge line on the rear side of
tanker opens.
The relevant LED light (2) on the remote
control illuminates.
In this case, the fluid inside the tanker
moves inside the discharge line up to the
safety valve, which is the next closing
element.
When the button that says ‘Boden-ventil’
(1) is pressed again, the bottom valve is
closed and the relevant LED light (2)
turns off.
