Kässbohrer Reefer 2023 Series, Руководство пользователя

Страница: 42 / 72

Foldable bumper
For some wagon types of huc-
kepack operations, the bum-
per must be folded before the
loading.
The bumper must be locked
and in the driving position in
the traffic way.
3.15.4. Ferry Skid
Ferry skids are optionally available to
protect the rear bumper, especially at
ferry operations.
3.15.4.1. Fixed Type Ferry Skid
The bolted type ferry skid can be
mounted also after the delivery of
vehicle.
Fixed type ferry skid
3.16. The Floor
The floor of your vehicle is made of insu-
lated sandwich panel. The upper surface
of the base is covered with aluminum
chequer plate.
There may be regional discharges on
the wheel compartment, called wheel
emptiness, in order to prevent the wheel
from hitting the floor.
For forklift entries into the vehicle, there
may be a maximum forklift front axle load
that has been defined specifically for
your vehicle and tested according to a
norm. You can find this information on
the label on the vehicle or in the sales
contract.
If a forklift heavier than the
permitted forklift front axle
load enters the vehicle, the
floor covering may be dama-
ged, causing the forklift to tip
over. There is a danger of slip-
ping when walking on wet
ground. There may be icing on
the floor in cold weather or
during cold chain transporta-
tion. Pay attention to the risk
of slipping. In case of damage
to the vehicle floor, it must be
replaced with the original spa-
re part.
The maximum allowable fork-
lift front axle load will be redu-
ced if low quality materials are
used.
3.16.1. Water Drainage Hole
There can be optionally different num-
bers of water discharge holes on the ve-
hicle floor. Thanks to this hole, the water
accumulated in the vehicle during wash-
ing or transportation is discharged.
In order to use this water drainage hole,
it is necessary to remove the rubber cov-
er on the bottom surface and turn the
valve to the open position.