Kässbohrer Reefer 2023 Series, Руководство пользователя

Страница: 12 / 72

If your vehicle is equipped
with 2 different types of coup-
lings, you must use only one
type at the same time.
When the couplings are
mounting/demounting, the
parking brake of the truck and
trailer must be engaged.
If the brake parameters are
modified, your vehicle's brake
calculation might be non-sui-
table for regulations. Only aut-
horized services must service
to the EBS modulator.
Only authorized services and
personnel should make servi-
ce operations for the brake
system.
There might be test points on the chassis
or above the air couplings. When you re-
move the test points rubber protection
parts and push the points you can check
the air pres-sure on the brake lines.
Test point
Palm coupling with a test point
3.1.1.1. Mounting of Standard (Palm)
Couplings
Couplings
•
Slightly slide plastic covers to the
upper side. Slide plastic covers to
upper side
•
Be sure that sealing surfaces are
clean and durable.If necessary,
clean/change the air coupling.
•
The coupling which comes from the
truck should be pushed slightly from
the upper side to the lower side and
connect the coupling. Be sure that
couplings are matched correctly.
•
First mount service line yellow (1).
•
Mount supply line red (2).
3.1.1.2. Demounting of Standard
(Palm) Couplings
•
The coupling which comes from the
truck should be pushed slightly from
the lower side to the upper side and
demount the coupling.