57 / 72
6. TRANSPORTATION SOLUTION
6.1. Load Transportation with Double
Deck
Double deck transportation is optionally
offered for the transport of pallets at low
height, and which cannot be carried on
top of each other.
Do not carry more than 700 kg
in the 1 meter long area along
the side panel and a total of
10,000 kg on the double deck
rails. If the average pallet
weight is 280 kg, the load will
be distributed uniformly.
6.1.1. Rail Type Double Deck
The vehicle side panel may have vertical
double deck rails for transporting a cer-
tain type of pallet (usually Euro pallet).
Rail Type Double Deck
You can put the pallets that you will carry
on the second floor on the profiles by
taking the profiles with the rails attached
to the desired height. Profiles must be
parallel to the ground. Otherwise, the
load may tip over.
You can use the handle to move the pro-
files upwards.
To slide the profiles downwards, the
latch on the lower side of the profiles
must be pushed. When this latch is
pushed, the profile will slide down.
Double profile latch
Profiles with loads on them
should not be moved.
6.1.2. Safety Instructions
•
Read the user manual carefully be-
fore assembling and using the dou-
ble deck loading system.
•
Before using the double deck load-
ing system, make sure that you will
install and install the system
correctly.
6.1.3. Proper Terms of Use
The user manual should be read care-
fully for the proper use of the double
deck loading system.
Double deck loading system and its
parts only.
•
Read the double-layer loading sys-
tem guide,
•
Traffic Regulations,
•
Traffic Compliance Regulation,
•
Should be used by people who have
knowledge of Load Safety in
vehicles.
Содержание Reefer 2023 Series
Страница 1: ......
Страница 52: ...Temperature Recorder...
Страница 63: ...63 72 HACCP label...
Страница 72: ......