![background image](http://html.mh-extra.com/html/kasco/waterglow-led4c11/waterglow-led4c11_operation-and-maintenance-manual_657139005.webp)
LED4C11 MANUAL
4
UNIVERSAL MOUNTING INSTRUCTIONS
1.
Attach the bracket (H) to the light fixture (C) by fitting the head of the 10-32 x 1/2’’ hex screw (I) into the
tabs on each side of the fixture. Place one bracket O-ring (G), one #10 lock washer (F), and one thumb
nut (E) on each #10 screw outside the bracket. Tighten the thumb screws on each side hand tight only.
Repeat this step for all fixtures.
Determine whether the Universal
mount bracket works better in a
horizontal or vertical configuration
for your application (see page 6)
before attaching the composite light
bracket to the fixture. Some config
-
urations require the composite light
bracket to be flipped from what is
pictured here.
2.
(Optional) If you want to use one of the color choices instead of the standard soft white light, peel the
protective lining from both sides of the colored lens (B) of your choice. Place the lens inside the lens cap
(A) making sure the 3 flaps are holding the lens in place. Repeat this step for all lens caps. Continue to
Step 3.
No gap
Flaps behind lens
G
C
F
E
H
A
Back to Contents