![background image](http://html.mh-extra.com/html/kasco/waterglow-led4c11/waterglow-led4c11_operation-and-maintenance-manual_657139007.webp)
LED4C11 MANUAL
6
UNIVERSAL MOUNTING INSTRUCTIONS (CONT.)
Hardware is provided for basic installation. Check your installation to ensure you have the correct hard-
ware. Additional hardware may be included, or you may need to purchase it if your installation varies from
the diagrams below.
For vertical bracket mounting, use the
hardware shown to fasten the two brackets
together. Then use your existing float screws
through the slot in the Universal bracket to
secure it.
5.
Use 1/4”-20 x 3/4” hex screws (P), flat washers
(K), lock washers (L), and hex nuts (M) as shown
to secure each composite light brackets (H) to
the Universal mounting brackets (O).
Use 1/4”-20 x 3/4” hex screws (R), fender wash
-
ers (Q), lock washers (L), and hex nut (M) to
secure the Universal bracket to the float.
Composite light bracket (H) needs to
be flipped upside down for horizontal
mounting.
6.
Repeat for remaining fixtures, spacing evenly around the float. Adjust the angle of the lights using
thumb nuts if desired, being sure to use the same angle for all fixtures. Cable ties can be used to attach
the fixture cords to float, decrease play, and ensure pro
tection. Cable-tie the light kit power cord to the
float opposite the fountain power cord for balance and to prevent damage from the fountain.
Remem-
ber: LEDC11 fixtures MUST be properly submerged (approximately halfway) to avoid overheating.
Q
L
M
R
K
L
M
O
H
P
O
P
K
L
M
Back to Contents