EN
You can clean the comb with a toothbrush and
mild detergent, for example. Allow the stripping
paw and belt, and the comb, to dry before use.
5.3. Belt package removal and cleaning
Remove the comb. Unscrew the screws of the
belt package from both sides of the machine
(
fi
g. 14). Pull the belt package out (
fi
g. 15).
If hair has got under the belt or the belt does
not turn easily, carefully pull the belt out from
the carrier (
fi
g. 16) and remove any hairs.
You can also remove the end rolls of the belt
package by pulling them. Detach them and
remove any hairs from around the carrier (
fi
g.
17).
Remove the hairs and install the belt package
by gently pushing it back into the machine
using in the indicated “IN ->“ direction. If the
belt package does not go back in easily, make
sure that you are inserting it the right way (
fi
g.
18).
6. MAINTENANCE
The mechanics of the machine have been lubri-
cated in the factory and do not need to be
maintained or lubricated. Please leave all other
maintenance procedures, other than the ones
mentioned in these instructions, to Karhia
Service. You can
fi
nd instructions for sending
your machine for servicing at www.karhia.com.
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Karhia Pro User Manual 1.1
11
Copyright Karhia Innovations Oy 2018
