EN
7. TROUBLESHOOTING
The following table presents typical problem situations and instructions for solving them. If the table
does not contain a solution to your problem, search for more instructions at www.karhia.com or contact
our customer service team.
Problem
Solution
The device does not turn on
Check that the transformer cord is undamaged and that it
is
fi
rmly plugged into the mains. Check, too, that all the
connecting points on the hose are attached as they
should be.
The machine is running, but does
not strip
Excess hair has probably got into the machine. Turn o
ff
the machine, unplug from the mains and remove the hair
from the machine.
The belt does not rotate
Excess hair has probably accumulated around the belt.
Turn o
ff
the machine and unplug from the mains.
Remove the hair from around the belt package. See the
“Belt package removal and cleaning” section of the
instructions.
Hair clogs up the machine
Check that the vacuum you are using works and that its
hose is attached
fi
rmly in the KarhiaTube container (or in
the KarhiaPro hose, if you are not using a KarhiaTube
container). There is enough suction if you can feel it at
the opening of the KarhiaPro machine. If possible, try
turning the suction up.
The machine overheats
Suction is o
ff
or too weak. Check that the vacuum is
working. Turn the suction up. Excess hair has gathered in
the machine and blocks the
fl
ow of air. Clean out hair
from the inside of the machine.
Karhia Pro User Manual 1.1
12
Copyright Karhia Innovations Oy 2018
