Karel MS26S, Инструкция по установке и обслуживанию, Страница: 45 / 62

Karel MS26s Installation & Maintenance Guide
Edition 3.1 37
To make the cabling of each LT26s(-H) Feature Phone :
1) The RJ plug on the system data cable must be passed through the cable
holes at the bottom part of the cabinet and connected to the LT/OP socket
on the MB26s motherboard.
2) The Data / + 8 VDC / GND signals on the connection box of the system
data cable must be wired in parallel to the corresponding pins of the
connection box of the telephone data cable.
3) The RJ plug at the free end of the telephone data cable must be inserted
into the female correspondant on the telephone.
4) For each LT26s(-H) thelephone, the wiring of the A / B terminals must be
made separately, by connecting the wires from the relevant extension
connector to the A / B terminals in the connection box of the telephone
data cable.
The following figure illustrates the cabling of LT26s(-H) Feature Phones.
Figure B-11