Kärcher WRP 1000 comfort, Руководство пользователя

Страница: 10 / 76

-
3
–
Suitable for dirt water
–
Suitable for continuous operations
–
With protection against dry-run
The bases of a safe operating of the equip-
ment is thr regularly maintenance accord-
ing to the following maintenance plan.
Use only original parts of the manufacturer
or part suggessted by him, such as
–
parts and wearing parts,
–
accessories parts,
–
operating materials,
–
cleaning agents.

Danger
Risk of accident while working on the unit.
During all tasks
Î Shut off water supply.
Î Switch off the immersion pump in the
building.
–
operator
Performances containing the notice
"operator" may only be performed by in-
structed individualls, who are able to
operate and service high pressure
equipment.
–
Maintenance
Performances with the notice "mainte-
nance" may only be performed by the
Kärcher- Maintenance-Mechanics.
In order to guarantee a reliable operation
og the equipment, we success, you signed
a maintenance agreement. Please refer to
you local Kärcher service department.
Immersion pump requirements
(building-side)
Pressure (min.) MPa
(bar) 0,2 (2)
Pressure (max.) MPa
(bar) 0,35
(3,5)
Minimum flow rate at 0.2
MPa (2 bar) l/h 1000
Maintenance and care
Maintenance instructions
Who may perform maintenance?
Maintenance contract
Maintenance schedule
Time Activity Assembly af-
fected Performance By whom
daily opinion Unit: Does the indicator lamp display "Fault"? To repair see "Fault assistance" Operator
weekly Clean the
filter Drain at wash-
ing place Clean the dirt collection basket in the floor. Operator
opinion Detergent con-
centration in proc-
essed water Reduce the detergent dosing at the detergent dispenser if there is foam formation. Operator
monthly opinion Sludge collec-
tion, pump basin After sludge has been collected, there should be no sludge in any of the ba-
sins. The sludge in the sludge collector should be maximum 1 m in height.
Check sludge level; pump out and dispose off the sludge according to the local
regulations, if required. Operator
Half-yearly
(if required) empty,
clean Processed wa-
ter tank (if avail-
able) Empty, clean, rinse and refill. Operator
Change
water,
clean the
basins Sludge collec-
tion, oil separa-
tor, pump basin Empty the basins, remove sludge completely and fill the basin with fresh wa-
ter. Store the waste disposal documents. Operator/
Disposal
agency
annual Exchange
filter Filter inlay Replace filter inlay of the filament filter. Customer
Service
10 EN