Kärcher WD 5, Оригинальное руководство пользователя

Страница: 18 / 185

– 5

Illustration
Switch the appliance on (move the rotary
switch to the left to position
MAX)
and start working.
Note:
The suction turbine starts with a delay
of 0.5 seconds after the electric tool has been
switched on. After the electric tool has been
switched off, the suction turbine will continue
to run for approx. 5 seconds to suck in the re-
maining dirt from the suction hose.
If the filter cleaning indicator is red, initiate the
filter cleaning.

Illustration
Insert the suction hose with the handle
into the accessory compartment on the
appliance head. Press the efficient filter
cleaning key 3 x times with the appliance
switched on; wait 4 seconds between the
individual presses.
Note
: If the filter cleaning display is illumi-
nated permanently or after the filter clean-
ing switch has been activated several
times, check the reservoir for its fill vol-
ume. Otherwise, the dirt might escape
when the container is opened.
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from a
gravel bed.

Illustration
Connect the suction hose to the blower
connection, this will activate the blower
function.

Turn off the appliance.

Illustration
Hook the floor nozzle into the parking po-
sition.

Turn off the appliance and disconnect the
mains plug.

Illustration
Remove the appliance head and empty
the reservoir filled with wet or dry dirt.
For appliances with drain screw
: Empty
the dry dirt over the container. Use the
drain screw to empty liquids.

Illustration
Stow away the mains cable and accesso-
ry at the machine. Store the appliance in a
dry room.

Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the
authorized customer service.
몇
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in wa-
ter.

Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.

If required, rinse the container and acces-
sories with water properly and dry them
before reuse.

Illustration
Only clean the cartridge filter under run-
ning water; do not wipe or brush. Let it dry
completely prior to installation.

The mains cable is probably dirty, clean
the mains cable.
If the cleaning power of the appliance deterio-
rates please check the following:

Accessories, suction hose or suction
tubes are clogged, please remove the ob-
struction using a stick.

Cartridge filter is dirty:
For appliances without efficient filter
cleaning
: Knock the dirt off the cartridge
filter, clean it under running water if nec-
essary.
(see description / illustration )
Efficient filter cleaning
Blowing function
Interrupting operation
Finish operation
Empty the container
Storing the appliance
Maintenance and care
Troubleshooting
Mains cable retraction does not function
Decreasing cleaning power
17 EN