Kärcher SG 4/4 CA Скачать руководство пользователя

Страница: 10 / 44

– 4



Insert the mains plug into the socket.



Switch on the device with the switch -
pump fresh water tank and with the
switch - switch on heating. The indicator
lamps illuminate.

Note:

The full heating performance is only

available if the steam plug is connected to
the appliance during the heating-up period.
Once the indicator lamp "heating" has gone
out, the system is ready for use.

Note:

Do not place the appliance into an

upright position while it is running. Other-
wise, the heating will turn off automatically
after a brief period and the indicator lamp
"water shortage" will illuminate in red.



Switch the heating off by means of the
switch while the appliance is being
transported.



Actuate the steam switch, steam will es-
cape. Always direct the steam gun at a
separate piece of cloth until the steam
is emitted evenly.

– The heating of the steam cleaner is

turned on during operation of the appli-
ance (indicator lamp glows yellow) in
order to maintain the pressure in the
boiler at a constant level.

– If the device is switched on without wa-

ter, initially, the indicator lamp "heating"
will glow yellow until the water shortage
thermostat switches the heating off. Af-
ter that, the indicator lamp "water short-
age" glows red.



When working with standard accesso-
ries, regulate the steam volume via the
rotary knob on the device.

Note:

If the steam quantity regulation is set

to a small quantity, steam may continue to
be emitted after the steam switch has been
released until the pressure in the steam
hose is reduced. This pressure can be re-
lieved even faster by briefly setting the
steam quantity regulation to a large vol-
ume.

– In wet areas, you can also wash away

the dirt instead of absorbing it with the
cloth. For this, set the moisture of the
steam to regulate via VAPOHYDRO
regulation by means of the rotary knob.
The higher the humidity of the steam,
i.e. the more water is contained in the
steam jet, the higher the rinsing effect.
If you turn the rotary knob in the coun-
ter-clockwise direction to the highest
quantity (+), a hot water jet is issued,
and the highest rinsing effect is
achieved.

– We recommend using the VAPOHY-

DRO in connection with the detail noz-
zle for cleaning the bathroom.

– Turn the rotary knob of the VAPOHY-

DRO regulation in the clockwise direc-
tion to the smallest quantity (-) when
working with cloths (floor nozzles, man-
ual nozzle) in order to have as little
moisture in the steam jet as possible.
The dirt loosening power of the steam is
improved this way.

Note:

If the rotary knob of the VAPOHY-

DRO regulation is turned in the counter-
clockwise direction to the highest quantity
(+), the boiler is depleted faster.

Note:

Once the water in the fresh water

tank is used up, a signal is issued and the
indicator light for "water shortage fresh wa-
ter tank" lights up red.



Fill the fresh water tank with a maxi-
mum of 0.5 gal (2 litres) of fresh tap wa-
ter using the filling funnel.

Once the indicator lamp "heating" has gone
out, the system is ready for use.

Note:

If the pump does not deliver any wa-

ter in spite of the fresh water tank being full,
the boiler must be descaled.