Kärcher SC 4 Iron Kit, Руководство по эксплуатации

Страница: 15 / 18

English 15
 Fill the water reservoir
 The steam cleaner is ready to use.
Note
The floor cleaning cloth and the cloth cover
have been pre-washed and can be used
immediately for working with the steam
cleaner.
 You can wash dirty floorcloths and cloth
covers in the washing machine at 60°C.
Do not use a liquid softener as this
would affect the ability of the cloths to
pick up dirt. You may tumble dry the ter-
ry cloths. The microfiber cloths are not
suitable for the tumble.
Often, failures have simple causes and you
can do the troubleshooting yourself using
the following overview. If you are in doubt
or if the failure is not listed here please con-
tact the authorized customer service.
 Descale the steam boiler.
No water in the water reservoir.
 Fill the water reservoir up to the "MAX"
marking.
No water in the steam boiler. Overheating
protection of the pump was triggered.
 Turn off the appliance.
 Fill the water reservoir
 Turn on the appliance.
Water reservoir has not been inserted prop-
erly or is calcified.
 Remove the water reservoir and rinse it.
 Insert the water reservoir and press
downwards until it arrests.
Steam switch is secured with the lock /
child-proof lock.
 Move the selector switch for the steam
volume to the front.
 Set the thermostat to level •••.
 Rinse or decalcify the boiler of the
steam cleaner.
During longer breaks from ironing, the
steam in the steam line can condense.
 Direct the first burst of steam at a sepa-
rate piece of cloth.
 Descale the steam boiler.
Care of the Accessories
Troubleshooting
Long heating-up time
Steam boiler is decalcified
No steam
Indicator lamp - "water shortage" blinks
red and signal sounds
Indicator lamp "water shortage" glows
red
Steam lever cannot be pressed
anymore
Steam iron "spits out" water!
After ironing breaks, water drops come
out of the steam pressure iron
High water output
Steam boiler is decalcified