Kärcher SC 4 Iron Kit, Руководство по эксплуатации

Страница: 10 / 18

10 English
 Illustrations on fold-
out pages!
Illustration
 Insert steering roller and runningwheels
and lock them.
Illustration

Open the cover of the appliance socket.
 Tightly insert the steam plug into the ap-
pliance connector. The plug must click
into place audibly.
To disconnect:
Press the cover of the appliance con-
nector down and disconnect the steam
plug from the appliance connector.
Illustration
Illustration
 Connect the required accessories (see
Chapter "How to use the accessories“)
to the steam gun. Insert the open end of
the accessory on the steam gun and
push onto the steam gun until the un-
locking button of the steam gun locks
into place.
Illustration

Use the extension tubes if necessary.
To do so, connect one or both exten-
sion tubes to the steam gun. Insert the
required accessories on the free end of
the extension tube.
 Move the selector switch for the steam
volume back (steam lever locked).
Illustration
 To detach the accessory parts, press
the unlocking button and pull the items
apart.
The water reservoir may be refilled at any
time.
ATTENTION
Do not use condensation water from the
drier!
Do not fill with detergent or other additives
(for example fragrances)!
Do not use pure distilled water! Max. 50%
distilled water and 50% tap water.
Do not use collected rain water!
You can remove the water reservoir to fill it
or you can fill it directly on the appliance.
 Pour water from a container into the
funnel inlet. Fill up to the "MAX" mark-
ing.
 Pull the water reservoir straight up.
 Fill the water reservoir up to the "MAX"
marking while positioned vertically un-
der the water tap.
 Insert the water reservoir and press
downwards until it arrests.

Place the unit securely on a firm sur-
face.
 Insert the mains plug into a socket.
 Press the ON switch to turn on the ap-
pliance.
 Wait until the indicator lamp (heater)
lights up permanently.
The steam cleaner is ready to use.
Notes
 If there is no or not enough water in the
steam boiler, the water pump starts and
supplies water from the reservoir into
the steam boiler. The filling process
may take several minutes.
 The appliance briefly closes the valve
every 60 seconds. This will prevent the
valve from sticking. There will be a
slight audible click. The steam delivery
is not impaired by this.
Operation
Attaching the Accessories
Removing the Accessories
Filling the Water Reservoir
Directly on the appliance
Take off water reservoir
Turning on the Appliance